Description
Unique Qualities
Water based Acrylic sealant, UV resistant, water resistant, highly flexible, non-hazardous.
Coverage
10m² – 12m² per 1 litre coat, depending on porosity of timber.
Safety
Keep out of reach of children. Contact with eyes, wash immediately with warm water. Do not empty into drains or water courses.
How to use:
Steps to using the WondaSeal Stain & Seal Wood Colour product.
Step 1 :
Clean wood from grease, oil, stains and solvents. Only use on raw timber. Sand down all other coating till raw wood. Sand in the direction of the wood grain. Shake the bottle well before use. Apply 2-3 coats sparingly. For a smoother feel, sand very lightly between coats with 400 grit sandpaper.
For a superb finish apply with a suitable sponge brush or alternatively with a good quality paint brush. Clean applicators immediately after use with water. Touch dry in 5 – 20 minutes between coats and 12 hours to cure. Avoid applying to hot surfaces and/or in direct sunlight. For surfaces of high wear and suitable varnish must be used over WondaSeal Wood Colour i.e wooden floors, decks, work tops.
1) A colour from the WondaSeal Wood Colour range provides better UV protection than Clear WondaSeal Wood Colour on exterior wood surfaces.
2) Colour may vary due to inconsistencies in the colour of the timber.
3) Apply to test area before use.
4) Not suitable for use on hardwoods.
Reviews
There are no reviews yet.